The high-end ceramic Clean Air Optima ® Design PTC fan heater (2in1 Heating and Fan) CA-904G has a power of 1000/2000 Watt and is the perfect solution for the comfortable (additional) heating of rooms up to 40m ² / 100m ³ on cool days and during the change of seasons, the heating of cold spots in your interior or suddenly emerging cold. The energy-efficient CA-904B fan heater has two settings for the PTC heater and fan, a timer for turning off after 1-12 hours and a thermostat for automatically controlling the desired temperature.

The energy market is changing! - Simple "Plug&Play" method for heating without natural gas.
With the electric heating of the Clean Air Optima® Design PTC ceramic fan heater CA-904G you can easily use energy generated from your own renewable sources (eg solar panels), to (additional) heat your rooms. In doing so, you will ensure substantial energy savings. Electricity is seen as the energy source of the future for good reason.
Design Fan Heater CA-904G
Suitable for rooms up to 40m² / 100m³ / 430ft²


Fan for cool performance during hot days
By choosing to incorporate a vertical fan rotor with a dynamic airflow of 5 meters/second, the CA-904G fan heater provides a quiet or powerful cooling breeze.


2in1:
With heating turned off, the CA-904G acts as a fan in the summer with a cooling breeze..




PTC system: Positive Temperature Coefficient heating element

This PTC fan heater CA-904G of Clean Air Optima ® features the modern "Positive Temperature Coefficient" (PTC) heating element that consists of special large aluminum fins that provide better conductivity than standard heating systems.The PTC heating element can adjust the heat output, therefore consumes less power and provides an energy-saving, quiet and integral heat build-up in the room. This quickly creates a comfortable temperature to the farthest corners of the room!





Thermostat controlled temperature control between 15°C and 35°C

With its adjustable thermostat, the Clean Air Optima® Design PTC fan heater CA-904G responds to room temperature. When the set temperature is reached, the heater stops heating. When the temperature drops a few degrees, the heater switches back on automatically.




Horizontal oscillation with 80° rotation mode

The switchable large rotation angle of up to 80° of the Clean Air Optima® Design PTC fan heater CA-904G ensures effective and even heat or coolness distribution: even to the furthest corners in the room!


Easy to use with digital display

The clear digital control panel on the top of the CA-904G designer fan heater features six touch sensitve buttons for easy selection of desired settings. In addition, the fan heater is also equipped with a remote control.

Setting modes of the design fan heater CA-904G:
• Turning fan heater on and off
• Desired temperature adjustable between 15-35°C
• Heating rate (high-low)
• Cooling rate (high-low)
• Oscillation 80° (switchable on and off)
• Timer function for switch-off time (1-12 hours)
• Current temperature indication in °C





Low-noise fan heater with energy-efficient system

The CA-904G's fan system provides two fan modes.

The ceramic Clean Air Optima® Design PTC fan heater CA-904G ensures that you enjoy very comfortable without wasting energy, thanks to the effective PTC heating system.
Quick heating from 10°C to 22°C in just 23 minutes
How-to videos

Usage and maintenance

Cleaning

Commissioning: before commissioning, refer to the detailed instructions in your manual.

Cleaning the outside of fan heater:
1. Turn off and unplug the device.
2. Make sure the heater has cooled down before implementation cleaning or maintenance.
3. Use a soft and damp cloth to clean the unit from dust and dirt.
4. Make sure no water gets into the device.

Cleaning dust filter:
The permanent dust filter is located on the side of the fan heater. For optimum effect, this permanent dust filter in the Clean Air Optima® Design PTC fan heater CA-904G can be cleaned monthly between uses with a soft brush or your vacuum cleaner. (Refer to fan heater manual CA-904G).

1. Turn off the appliance, unplug it, let it cool down thoroughly first.
2. Press both release-buttons and remove the dust filter from the device.
3. Use your vacuum cleaner to clean the dust filter and a soft and damp cloth to clean the housing of the fan heater serving the dust filter: then dry carefully.
4. Replace the dust filter and press it gently until you hear a click.

Do not use harsh detergents to clean the surface to prevent damage to the unit and the PTC heating elements.

Retain the fan heater in a dry and ventilated place.